Aertecnica’s TX4A central vacuum unit is equipped with an LED electronic system. Italian-made, its design is sleek, discreet and extremely elegant. Made from AISI 304 stainless steel, the unit is highly resistant to atmospheric conditions. As a result, it can be installed outdoors, even in critical weather conditions.

Aertecnica’s Perfetto Inox TX range has been awarded quality and environmental certifications (ISO 9001 and ISO 14001). Committed to environmental quality and the health and well-being of its customers, the Aertecnica brand is a benchmark in the field of central vacuum systems. With this range, you’re opting for impeccable vacuuming, with no release of allergens or bacteria.

What’s more, the machine is started by a Soft Start soft-start motor.
It’s also extremely quiet, thanks to an improved motor housing that reduces the noise level even further.

The Aertecnica TX4A hoover is simple, powerful and ergonomic!

AERTECNICA’S INNOVATIVE PATENTED SYSTEM AUTOMATICALLY CLEANS THE FILTER:

When the unit is switched on and throughout the suction cycle, a rod pivots inside the filter to remove the dust. So, even after vacuuming up the residue, your filter will always be clean. Only Aertecnica TX range units offer this powerful, high-performance cleaning system.

• Model: Aertecnica TX4A central vacuum unit
• Supplier reference: CMTX4A
• Thru-flow motor with Soft Start
• Motor power: 1590 Watts
• Power supply: 220/240V
• Suction power: 566 Air Watts
• Air flow : 168 m3/h
• Vacuum : 4150 mm CE
• Noise level : 64.5 dB
• Compatible with a cordless system
• Dust tank capacity: 22L
• 2 dust outlets (left and right)
• Dual air exhaust (right and left)
• Suction point at the front of the unit
• Farthest point from the unit: 50 m
• Maximum number of intakes: 25

DIMENSIONS OF THE UNIT :

• Height: 115 cm
• Diameter: Ø34 cm
• Weight: 17.3 kg

DELIVERED WITH :

• Rubber sleeve
• Wall bracket for mounting the unit
• Air outlet grille
• Air expulsion plug
• Free air silencer

• 1 x 9 m dimmable flexible hose with ergonomic handle (Commissioning by variable speed drive – ref: AAC293)
• 1 Wall bracket for hose
• 1 Combination brush
• 1 x 300 mm hard floor brush for parquet and tiles
• 1 Dusting brush
• 1 Upholstery brush
• 1 Flat crevice tool
• 1 Telescopic wand
• 1 Accessory holder that clips onto the wand

• 1 bundle of 25.41 ml white PVC central vacuum hose (1.155 ml bar delivered in bundles of 13 tubes) diameter 50.80 (2 inches).
• 4 Europe white square sockets
• 4 Mounting plates
• 4 Short 90° elbows
• 10 Elbows 90°long FF
• 3 90° tees
• 8 Elbows 45° FF
• 12 Sleeves
• 8 Collars
• 1 Tube of glue 60ml
• 30 ml wire
• 1 installation manual

• 1 crumb tray
• 1 CC90
• 1 90° tee
• 0.30 ml tyflex (flexible hose)

• 0.35 ml PVC pipe
• 1 garage socket
• 1 CC90
• 1 ml of wire
• 1 90° tee
• 2 clamps