• 1 flexible hose to fit all ALDES suction outlets: any length
• 1 standard chrome-plated handle replaces the ALDES pneumatic control handle 11070062
• 1 Starting socket
• 1 Stop valve
• 1 Wall bracket for flexible hose
• 1 Combination brush clip and shine
• 1 Hard floor brush parquet tiles 300 mm
• 1 Dusting brush
• 1 Upholstery brush
• 1 Flat crevice tool
• 1 Chrome telescopic wand
• 1 Accessory holder that clips onto the wand

ALDES flexible hose with standard chrome handle replaces the ALDES pneumatic control handle 11070062 with starter sleeve and stop valve

Replacing the original Aldes handle Ref: 11070062 which is no longer available since September 2024, Aldes has stopped manufacturing the ‘Depression’ starting handle (gun loading).

Use the Aldes Ø32 central vacuum handle socket to start the system by blowing with the mouth, the pressure wave will be picked up by the central unit’s starting pressure switch.

All owners of an Aldes centralised wireless system with a ‘vacuum’ start can purchase the plastic sleeve, Ref: AAC510, to avoid direct contact of the mouth with the suction handle when blowing air directly.

The Aldes central vacuum handle socket allows you to start your central vacuum system using a blast of air without needing the pneumatic handle.

1. There is no contact with the dust in the hose by holding the mouth on the socket for 2 to 3 seconds,
   because the air is sucked in and not blown out as soon as the system starts up.
2. Once the system has started, remove the socket so that you can connect cleaning accessories such as the telescopic wand and work brushes.
3. To stop the suction system, use the stop valve on the handle Ref: AD086, which stops the flow, thus stopping the central unit.